Electrician in Berowra

Backup power and outdoor lighting for Berowra homes along the ridge, with bushland behind many of the blocks.

Your Berowra Electrician

Berowra runs along a ridge with bushland on both sides, and many owners here want power that keeps going when the grid drops out. From our Terrey Hills base, End Point Electrical fits generator inlets with changeover switches and installs home batteries alongside existing solar. Sensor lights for dark back yards are a common addition. Phone 0478 045 154. NSW licence 397311C.

Nearby suburbs we cover

  • Mount Colah
  • Asquith
  • Hornsby
  • Mount Kuring-gai
The End Point Electrical team standing together outdoors
Based in
Terrey Hills NSW 2084
Hours
Mon to Fri 7am to 5pm, Sat 7am to 12pm
NSW licence
397311C

Berowra 2081

Berowra: ridge-top homes with the bush at the back fence

Most Berowra homes are detached houses from the 1960s to the 1980s, in brick or timber on sloping blocks, with later homes filling the gaps. The suburb follows the ridge beside the Pacific Highway and the railway, with Berowra Valley on one side and Ku-ring-gai Chase on the other, so a lot of blocks back straight onto bushland.

Storms can bring branches down on overhead lines in suburbs like this, so backup power is a regular topic. A generator inlet with a changeover switch lets a portable generator feed chosen circuits safely, without a lead through a window. Where there is solar on the roof, a home battery with a backup function can keep the fridge and some lights running. Dark yards are the other theme, and sensor floodlights at the back door and along the path to the shed suit them well.

Typical jobs

Typical Jobs in Berowra

What the work usually involves, how long it takes and what you are left with when we pack up.

  • Switchboard upgrade

    Generator inlets and changeover switches for Berowra homes, wired so the generator feeds chosen circuits only.

    The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.

    Usual time on site
    4 to 6 hours
    You end up with
    A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
    More on switchboard upgrade
  • Home battery install

    Home batteries alongside existing solar in Berowra, set up to back up essential circuits where the system supports it.

    Most home batteries in northern Sydney go in beside solar panels that are already on the roof. We open the switchboard first, because an older board often needs space or RCD protection before a battery and its inverter can connect. The network application goes in before connection day. The battery is mounted where the standard allows, wired back to the board and labelled as a second source of supply.

    You end up with
    A tested battery system with labelled isolation at the switchboard and a Certificate of Compliance for Electrical Work (CCEW)
    More on home battery install
  • Lighting upgrade

    Sensor floodlights at the back door and on the path to the shed, for dark Berowra yards.

    Plenty of lighting jobs start with old halogen downlights coming out in favour of LED. Others add lights to a renovated room or light a path and garden for the evenings. We agree the layout and the switching with you first, so the lights land where you need them. Then we fit them and set up dimmers in the rooms where you want softer light.

    Usual time on site
    1 to 3 hours
    You end up with
    Working lights on the switching you asked for, with a CCEW for the installation work
    More on lighting upgrade

Bigger Projects We Have Wired

Two builds that show how we plan and run a job from first drawings to handover.

What Our Clients Say About End Point Electrical

5.0 from 14 Google reviews
  • Rated 5 out of 5

    “Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”

    Melanie Bloom

    Google review

  • Rated 5 out of 5

    “Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”

    Reece Tailby

    Google review

  • Rated 5 out of 5

    “Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”

    Tristan Black

    Google review

  • Rated 5 out of 5

    “Excellent communication and quality of work. Very professional, would highly recommend.”

    Dexywilson

    Google review

  • Rated 5 out of 5

    “I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”

    Benjamin Williams

    Google review

  • Rated 5 out of 5

    “Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”

    Ryan Hutton

    Google review

  • Rated 5 out of 5

    “Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”

    Ben Rasmussen

    Google review

  • Rated 5 out of 5

    “Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”

    Mat Chakley BRACE

    Google review

  • Rated 5 out of 5

    “Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”

    Nathanael Merchant

    Google review

  • Rated 5 out of 5

    “We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”

    Andy Crow

    Google review

  • Rated 5 out of 5

    “I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”

    Graham Lewis

    Google review

  • Rated 5 out of 5

    “I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”

    Harald Svensen

    Google review

  • Rated 5 out of 5

    “Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”

    Naomi Cohen

    Google review

  • Rated 5 out of 5

    “Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”

    Adam Farrow-Palmer

    Google review

Berowra Electrician FAQs

How does a generator changeover switch work in a Berowra home?

A changeover switch sits at the switchboard and connects the house to either the grid or a generator inlet, never both at once. During an outage you plug the generator into the inlet outside, move the switch and run the circuits you chose, such as the fridge and some lights. It also stops power feeding back into the street lines.

Will a battery keep my Berowra house running in a blackout?

Only if it is set up for backup. Some batteries simply store solar for the evening and shut down with the grid. A battery with a backup function runs selected circuits through its own gateway when the grid drops. We look at your solar system and switchboard, then explain which circuits can be backed up and what that means for battery size.

Do homes near the bush in Berowra need anything different electrically?

The same wiring rules apply, but a few details help. Sealing conduit where cables enter the house keeps out debris and animals, and outdoor fittings should be weather rated with sound covers. If your block has bushfire conditions on a building approval, your builder or certifier will tell you what applies to external fittings.

Book an Electrician in Berowra

Call 0478 045 154, or send through the job and your address in Berowra and we will come back to you with a quote.