Electrician in Collaroy Plateau

Battery installs and switchboard upgrades for Collaroy Plateau homes with solar already on the roof.

Your Collaroy Plateau Electrician

Up on Collaroy Plateau, many homes already have solar panels, so adding a home battery is a typical job for End Point Electrical, travelling from our base in Terrey Hills. The battery often needs the switchboard upgraded first. Air conditioning circuits for the upper floors are another common request. Phone 0478 045 154. Our NSW contractor licence is 397311C.

Nearby suburbs we cover

  • Collaroy
  • Wheeler Heights
  • Cromer
  • Narrabeen
The End Point Electrical team standing together outdoors
Based in
Terrey Hills NSW 2084
Hours
Mon to Fri 7am to 5pm, Sat 7am to 12pm
NSW licence
397311C

Collaroy Plateau 2097

Collaroy Plateau: brick homes with roofs facing the sun

Collaroy Plateau sits on the high ground above Collaroy and Narrabeen. Most of it is detached houses, a large share of them brick homes from the post-war decades onwards, many built on sloping blocks with split levels or a garage tucked underneath. Plenty have been extended upwards to take in the views, and a good number now carry solar panels on their roofs.

Homes with solar are the main reason we install batteries here. Before a battery goes in, we open the switchboard, because older boards often lack the space or RCD protection needed for a second source of supply. Upper storeys added for the views can get warm in summer, so split system air conditioning is a frequent addition, each on its own circuit. Garages under the house make a tidy spot for the battery and inverter where the standard allows.

Typical jobs

Typical Jobs in Collaroy Plateau

What the work usually involves, how long it takes and what you are left with when we pack up.

  • Home battery install

    Batteries added beside existing solar on Collaroy Plateau roofs, with the board checked and upgraded first where needed.

    Most home batteries in northern Sydney go in beside solar panels that are already on the roof. We open the switchboard first, because an older board often needs space or RCD protection before a battery and its inverter can connect. The network application goes in before connection day. The battery is mounted where the standard allows, wired back to the board and labelled as a second source of supply.

    You end up with
    A tested battery system with labelled isolation at the switchboard and a Certificate of Compliance for Electrical Work (CCEW)
    More on home battery install
  • Switchboard upgrade

    Older Collaroy Plateau boards replaced to make room for a battery, solar and new circuits.

    The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.

    Usual time on site
    4 to 6 hours
    You end up with
    A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
    More on switchboard upgrade
  • Air conditioning circuit

    Dedicated circuits for split systems in upper floor extensions that warm up in summer.

    Most heating and cooling work starts at the switchboard. A split system or ducted unit needs its own circuit and an isolator at the outdoor unit, sized for what the system draws, and older boards often need upgrading first. We wire for brands such as Daikin and Mitsubishi Electric. Electric underfloor heating in bathrooms is another regular job.

    You end up with
    A dedicated, tested circuit for the system and a CCEW
    More on air conditioning circuit

Bigger Projects We Have Wired

Two builds that show how we plan and run a job from first drawings to handover.

What Our Clients Say About End Point Electrical

5.0 from 14 Google reviews
  • Rated 5 out of 5

    “Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”

    Melanie Bloom

    Google review

  • Rated 5 out of 5

    “Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”

    Reece Tailby

    Google review

  • Rated 5 out of 5

    “Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”

    Tristan Black

    Google review

  • Rated 5 out of 5

    “Excellent communication and quality of work. Very professional, would highly recommend.”

    Dexywilson

    Google review

  • Rated 5 out of 5

    “I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”

    Benjamin Williams

    Google review

  • Rated 5 out of 5

    “Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”

    Ryan Hutton

    Google review

  • Rated 5 out of 5

    “Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”

    Ben Rasmussen

    Google review

  • Rated 5 out of 5

    “Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”

    Mat Chakley BRACE

    Google review

  • Rated 5 out of 5

    “Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”

    Nathanael Merchant

    Google review

  • Rated 5 out of 5

    “We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”

    Andy Crow

    Google review

  • Rated 5 out of 5

    “I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”

    Graham Lewis

    Google review

  • Rated 5 out of 5

    “I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”

    Harald Svensen

    Google review

  • Rated 5 out of 5

    “Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”

    Naomi Cohen

    Google review

  • Rated 5 out of 5

    “Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”

    Adam Farrow-Palmer

    Google review

Collaroy Plateau Electrician FAQs

Can I add a battery to the solar on my Collaroy Plateau house?

In most cases, yes. We check your existing inverter and switchboard first, since an older board may need space or RCD protection before a battery can connect. A network application is lodged before connection day. The battery is mounted in a location the standard allows, often a garage or a shaded outside wall.

Where can a home battery go in a split-level house?

A garage or carport under the house is often a good spot, as it keeps the unit out of direct sun and close to the switchboard. The standard restricts some locations, such as near windows or exits and inside habitable rooms. We look at the options on site and explain which ones meet the rules.

Does a new air conditioner upstairs need its own circuit?

Most split systems should run on a dedicated circuit sized for the unit, rather than sharing a power circuit with other rooms. That keeps the breaker from tripping on hot days. We check the switchboard has room and protection for it. Then we run the cable to the units and fit an isolator outside.

Book an Electrician in Collaroy Plateau

Call 0478 045 154, or send through the job and your address in Collaroy Plateau and we will come back to you with a quote.