Electrician in Cromer

Wiring for granny flats and extensions on Cromer house blocks, and maintenance for the businesses in its industrial area.

Your Cromer Electrician

End Point Electrical looks after Cromer from our base in Terrey Hills. On the residential streets, typical work is wiring a granny flat or rear extension, which usually means a new submain from the house switchboard. In the light industrial area we handle maintenance and new circuits for business units. To book, call 0478 045 154. NSW licence 397311C.

Nearby suburbs we cover

  • Narraweena
  • Collaroy Plateau
  • Dee Why
  • Wheeler Heights
The End Point Electrical team standing together outdoors
Based in
Terrey Hills NSW 2084
Hours
Mon to Fri 7am to 5pm, Sat 7am to 12pm
NSW licence
397311C

Cromer 2099

Cromer: family blocks with room out the back

Most of Cromer is detached family homes from the post-war decades, on blocks with enough room behind the house for a pool or a secondary dwelling. Granny flats have become a common addition. Each one needs its own supply, normally a submain run from the main switchboard to a small board in the new building, and that often shows the original board is too small to take it.

Cromer also has a light industrial area along its edge, with factory units and trade workshops. Work there tends to be maintenance and additions, such as new power circuits for equipment or LED fittings in place of tired fluorescent tubes. On the house side, rear extensions and garage conversions follow the same pattern as granny flats, with new circuits checked against what the existing board can handle.

Typical jobs

Typical Jobs in Cromer

What the work usually involves, how long it takes and what you are left with when we pack up.

  • Build or renovation wiring

    Granny flats and rear extensions on Cromer blocks, with a submain and a separate board for the new building.

    We start from your plans and draw the lighting and power layout room by room. Cable goes in at rough-in while the frame is open, with each run photographed, and fit-off happens once the surfaces are finished. We work to the builder’s program and size the switchboard for what you plan to add later, so a late change rarely means opening walls.

    You end up with
    Every circuit and safety switch tested, with a CCEW at handover
    More on build or renovation wiring
  • Switchboard upgrade

    Original Cromer boards replaced when a granny flat or extension needs more room.

    The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.

    Usual time on site
    4 to 6 hours
    You end up with
    A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
    More on switchboard upgrade
  • Commercial fit-out and maintenance

    Maintenance and new circuits for units in the Cromer light industrial area.

    Commercial work is mostly power and lighting for office and shop fit-outs, plus the emergency and exit lights that need regular testing. In a larger building we arrange access and any shutdowns with the building manager. Noisy or power-off work is planned around your trading hours where possible, and the switchboard schedule is updated when we finish.

    You end up with
    Tested circuits with an updated switchboard schedule, plus a CCEW
    More on commercial fit-out and maintenance

Bigger Projects We Have Wired

Two builds that show how we plan and run a job from first drawings to handover.

What Our Clients Say About End Point Electrical

5.0 from 14 Google reviews
  • Rated 5 out of 5

    “Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”

    Melanie Bloom

    Google review

  • Rated 5 out of 5

    “Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”

    Reece Tailby

    Google review

  • Rated 5 out of 5

    “Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”

    Tristan Black

    Google review

  • Rated 5 out of 5

    “Excellent communication and quality of work. Very professional, would highly recommend.”

    Dexywilson

    Google review

  • Rated 5 out of 5

    “I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”

    Benjamin Williams

    Google review

  • Rated 5 out of 5

    “Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”

    Ryan Hutton

    Google review

  • Rated 5 out of 5

    “Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”

    Ben Rasmussen

    Google review

  • Rated 5 out of 5

    “Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”

    Mat Chakley BRACE

    Google review

  • Rated 5 out of 5

    “Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”

    Nathanael Merchant

    Google review

  • Rated 5 out of 5

    “We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”

    Andy Crow

    Google review

  • Rated 5 out of 5

    “I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”

    Graham Lewis

    Google review

  • Rated 5 out of 5

    “I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”

    Harald Svensen

    Google review

  • Rated 5 out of 5

    “Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”

    Naomi Cohen

    Google review

  • Rated 5 out of 5

    “Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”

    Adam Farrow-Palmer

    Google review

Cromer Electrician FAQs

What electrical work does a granny flat in Cromer need?

A granny flat normally gets its own small switchboard, fed by a submain cable from the main board at the house. The cable is sized for the flat's load, including cooking and air conditioning. We check whether the main board can supply it or needs upgrading, then run the submain and wire the flat at rough-in.

Can a granny flat have its own electricity meter?

It can, though it is not required. A separate meter means the flat gets its own power bill, which suits some rental arrangements. It involves an application to the network and the retailer, and the meter position has to meet their rules. Many owners keep a single meter with a submain, which is simpler and cheaper.

Do you work on business units in the Cromer industrial area?

Yes. Typical work includes new power circuits for equipment and LED lighting to replace old fluorescent fittings. We also find faults when a board keeps tripping. We check the unit's switchboard capacity before adding load, and can work around your opening hours to limit time without power where the job allows.

Book an Electrician in Cromer

Call 0478 045 154, or send through the job and your address in Cromer and we will come back to you with a quote.