Electrician in Eastwood
Electrical work for Eastwood homes old and new, and for the small shops around the town centre.
Your Eastwood Electrician
End Point Electrical takes on Eastwood work from Terrey Hills, as part of our Ryde and Epping area. Typical jobs here are circuits for split and ducted air conditioning, and power for the small shops and eateries in the town centre. The older brick homes often need a new board before anything else is added. Phone 0478 045 154 to book. NSW contractor licence 397311C.
Nearby suburbs we cover
- Epping
- Marsfield
- Denistone
- Denistone West
- Based in
- Terrey Hills NSW 2084
- Hours
- Mon to Fri 7am to 5pm, Sat 7am to 12pm
- NSW licence
- 397311C
- Phone
- 0478 045 154
Eastwood 2122
Eastwood: rebuilds among post-war brick homes, and a busy shopping strip
Eastwood's house streets mix post-war brick homes on good-sized blocks with the large new houses and duplexes replacing many of them. The older homes often still have the board they were built with, and owners usually upgrade it before adding air conditioning. In the rebuilds, ducted systems are common, and we work out the circuit with the air conditioning installer before the plaster goes up.
Around the station, the town centre is packed with small shops and restaurants, many with a flat or office above. Tenancies change often, and a new business may need extra circuits for kitchen equipment or a refit of the shop lighting. Some owners are also replacing old electric storage hot water with a heat pump, which needs its own circuit and sometimes a change to how the supply is metered.
Typical jobs
Typical Jobs in Eastwood
What the work usually involves, how long it takes and what you are left with when we pack up.
Air conditioning circuit
Circuits for ducted systems in new Eastwood homes, agreed with the air conditioning installer before the plaster goes on.
Most heating and cooling work starts at the switchboard. A split system or ducted unit needs its own circuit and an isolator at the outdoor unit, sized for what the system draws, and older boards often need upgrading first. We wire for brands such as Daikin and Mitsubishi Electric. Electric underfloor heating in bathrooms is another regular job.
- You end up with
- A dedicated, tested circuit for the system and a CCEW
Commercial fit-out and maintenance
Power for kitchen equipment and shop lighting when a new business moves into an Eastwood shopfront.
Commercial work is mostly power and lighting for office and shop fit-outs, plus the emergency and exit lights that need regular testing. In a larger building we arrange access and any shutdowns with the building manager. Noisy or power-off work is planned around your trading hours where possible, and the switchboard schedule is updated when we finish.
- You end up with
- Tested circuits with an updated switchboard schedule, plus a CCEW
Switchboard upgrade
Original boards in post-war Eastwood brick homes, upgraded before air conditioning is added.
The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.
- Usual time on site
- 4 to 6 hours
- You end up with
- A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
Bigger Projects We Have Wired
Two builds that show how we plan and run a job from first drawings to handover.
What Our Clients Say About End Point Electrical
5.0 from 14 Google reviews- Rated 5 out of 5
“Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”
Melanie Bloom
- Rated 5 out of 5
“Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”
Reece Tailby
- Rated 5 out of 5
“Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”
Tristan Black
- Rated 5 out of 5
“Excellent communication and quality of work. Very professional, would highly recommend.”
Dexywilson
- Rated 5 out of 5
“I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”
Benjamin Williams
- Rated 5 out of 5
“Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”
Ryan Hutton
- Rated 5 out of 5
“Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”
Ben Rasmussen
- Rated 5 out of 5
“Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”
Mat Chakley BRACE
- Rated 5 out of 5
“Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”
Nathanael Merchant
- Rated 5 out of 5
“We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”
Andy Crow
- Rated 5 out of 5
“I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”
Graham Lewis
- Rated 5 out of 5
“I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”
Harald Svensen
- Rated 5 out of 5
“Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”
Naomi Cohen
- Rated 5 out of 5
“Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”
Adam Farrow-Palmer
Eastwood Electrician FAQs
We are opening a restaurant in an Eastwood shopfront. What electrical work might it need?
Commercial kitchens often need more circuits than the last tenant used, sometimes three-phase for cooking equipment. We check the board and the supply to the shop against your equipment list, then plan the circuits and lighting. Where the supply is too small, we explain what an upgrade involves. Send us the equipment list before you sign the lease if you can.
Can you wire a heat pump hot water system in my Eastwood house?
Yes. A heat pump replacing an old electric storage tank usually needs its circuit checked, and sometimes replaced, to suit it. If the old tank ran on a controlled load tariff, ask your retailer whether the heat pump can stay on it, since some models need power at other times of day. We handle the electrical connection while the plumber installs the unit.
How do you work with the air conditioning installer on a new Eastwood home?
We agree the unit sizes and positions with the installer early, then run the circuit and isolator at rough-in so the system is ready to connect once it arrives. Large ducted systems can need heavier cable than expected, so we size the switchboard for it from the start. Brands we wire for include Daikin and Mitsubishi Electric.
Book an Electrician in Eastwood
Call 0478 045 154, or send through the job and your address in Eastwood and we will come back to you with a quote.