
Electrician in Ingleside
Power for sheds and long driveways on the acreage blocks that make up much of Ingleside.
Your Ingleside Electrician
Ingleside sits right next to Terrey Hills, where End Point Electrical is based, so its semi-rural blocks are on our doorstep. Typical jobs are running a submain out to a shed or studio, and lighting long driveways and gates. Owners tired of storm outages often ask about a battery with backup or a generator inlet. Ring 0478 045 154 to arrange a site visit. NSW licence 397311C.
Nearby suburbs we cover
- Terrey Hills
- Elanora Heights
- Warriewood
- Mona Vale

- Based in
- Terrey Hills NSW 2084
- Hours
- Mon to Fri 7am to 5pm, Sat 7am to 12pm
- NSW licence
- 397311C
- Phone
- 0478 045 154
Ingleside 2101
Ingleside: semi-rural acreage on the edge of the bush
Ingleside is mostly large semi-rural lots, with houses set well back from the road and room for sheds and workshops. Getting power to those outbuildings means a submain sized for the distance, since voltage drops over a long cable run, and usually a small board in the shed with its own RCD. Trenching across a paddock or beside a long driveway is part of most of these jobs.
Many blocks back onto bushland, and storms can bring trees down across power lines in the area. That makes backup power a regular topic, either a battery that can run essential circuits or a properly installed inlet for a generator. Long driveways and gates also need lighting and power, and a camera at the gate lets owners see who is there from the house.
Typical jobs
Typical Jobs in Ingleside
What the work usually involves, how long it takes and what you are left with when we pack up.
Build or renovation wiring
Submains and sub-boards for Ingleside sheds and studios, sized for the long cable runs on acreage.
We start from your plans and draw the lighting and power layout room by room. Cable goes in at rough-in while the frame is open, with each run photographed, and fit-off happens once the surfaces are finished. We work to the builder’s program and size the switchboard for what you plan to add later, so a late change rarely means opening walls.
- You end up with
- Every circuit and safety switch tested, with a CCEW at handover
Security camera install
Gate cameras and driveway lighting for Ingleside properties set well back from the road.
A typical home job is a set of cameras covering the entry points and the driveway, recording to a unit inside the house, with the feeds on your phone. Some homes add a video intercom at the front door or gate. We plan the camera positions with you, then run the cable through the roof space and walls so nothing is left exposed outside.
- You end up with
- Cameras showing on your phone, plus a walkthrough of the recorder and the app
Home battery install
Batteries with backup for Ingleside homes, so essential circuits keep running when the grid goes down.
Most home batteries in northern Sydney go in beside solar panels that are already on the roof. We open the switchboard first, because an older board often needs space or RCD protection before a battery and its inverter can connect. The network application goes in before connection day. The battery is mounted where the standard allows, wired back to the board and labelled as a second source of supply.
- You end up with
- A tested battery system with labelled isolation at the switchboard and a Certificate of Compliance for Electrical Work (CCEW)
Bigger Projects We Have Wired
Two builds that show how we plan and run a job from first drawings to handover.
What Our Clients Say About End Point Electrical
5.0 from 14 Google reviews- Rated 5 out of 5
“Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”
Melanie Bloom
- Rated 5 out of 5
“Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”
Ryan Hutton
- Rated 5 out of 5
“Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”
Reece Tailby
- Rated 5 out of 5
“Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”
Tristan Black
- Rated 5 out of 5
“Excellent communication and quality of work. Very professional, would highly recommend.”
Dexywilson
- Rated 5 out of 5
“I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”
Benjamin Williams
- Rated 5 out of 5
“Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”
Ben Rasmussen
- Rated 5 out of 5
“Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”
Mat Chakley BRACE
- Rated 5 out of 5
“Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”
Nathanael Merchant
- Rated 5 out of 5
“We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”
Andy Crow
- Rated 5 out of 5
“I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”
Graham Lewis
- Rated 5 out of 5
“I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”
Harald Svensen
- Rated 5 out of 5
“Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”
Naomi Cohen
- Rated 5 out of 5
“Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”
Adam Farrow-Palmer
Ingleside Electrician FAQs
How do I get power to a shed on my Ingleside property?
We run a submain from the house switchboard to a small board in the shed, with its own RCD protection. The cable size depends on the distance and the load, because voltage drops over long runs. The cable goes underground in conduit at the required depth. Tell us what the shed will run and we size it for that.
Can a battery keep my Ingleside house running in a blackout?
Some can, if the system is set up for backup. Not every battery does this, and backup is usually limited to selected circuits such as the fridge and the lights. We wire those circuits to a separate backup board. How long they run depends on the size of the battery and what is switched on at the time.
Can I connect a generator to my Ingleside house during outages?
Not by plugging it into a power point, which is dangerous. The safe way is a generator inlet with a changeover switch at the switchboard, so the house is isolated from the grid while the generator runs. We install the inlet and switch and label which circuits it feeds. The generator itself needs to suit that load.

Book an Electrician in Ingleside
Call 0478 045 154, or send through the job and your address in Ingleside and we will come back to you with a quote.


