
Electrician in Cremorne
Electrical work for Cremorne apartment owners, from interwar flats near Military Road to the houses on Cremorne Point.
Your Cremorne Electrician
A common question from Cremorne unit owners is whether the flat can take more load. End Point Electrical checks the supply to older units before an induction cooktop or split system goes in, and replaces the unit board when it has run out of room. Shopfronts along Military Road bring fit-out work as well. We are based in Terrey Hills. Call 0478 045 154, licence 397311C.
Nearby suburbs we cover
- Neutral Bay
- Mosman
- Cammeray

- Based in
- Terrey Hills NSW 2084
- Hours
- Mon to Fri 7am to 5pm, Sat 7am to 12pm
- NSW licence
- 397311C
- Phone
- 0478 045 154
Cremorne 2090
Cremorne: interwar flats, older blocks and harbourside houses
Cremorne has a high share of apartments, from interwar and art deco flats to 1960s and 1970s blocks, with houses more common on Cremorne Point and the streets near the water. Many older units were wired for little more than lighting and a stove. The cable from the meter panel to each unit is often light, and the unit board may hold only a handful of circuits.
Kitchen renovations now tend to include induction, and many owners add a split system at the same time, which together can exceed what the unit supply was built for. We work out what the supply can carry before anything is ordered. If it falls short, the options include a heavier sub-main from the meter panel, which needs strata approval, or appliances with a power limit setting. Military Road shopfronts bring fit-outs and shop lighting too.
Typical jobs
Typical Jobs in Cremorne
What the work usually involves, how long it takes and what you are left with when we pack up.
Switchboard upgrade
Load checks and new unit boards for Cremorne flats taking on induction or air conditioning, with a heavier sub-main where strata agrees.
The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.
- Usual time on site
- 4 to 6 hours
- You end up with
- A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
Air conditioning circuit
Circuits for split systems in Cremorne flats, after confirming the unit supply can carry them with the kitchen running.
Most heating and cooling work starts at the switchboard. A split system or ducted unit needs its own circuit and an isolator at the outdoor unit, sized for what the system draws, and older boards often need upgrading first. We wire for brands such as Daikin and Mitsubishi Electric. Electric underfloor heating in bathrooms is another regular job.
- You end up with
- A dedicated, tested circuit for the system and a CCEW
Commercial fit-out and maintenance
Power and lighting for Military Road shopfronts in Cremorne when a tenancy changes hands.
Commercial work is mostly power and lighting for office and shop fit-outs, plus the emergency and exit lights that need regular testing. In a larger building we arrange access and any shutdowns with the building manager. Noisy or power-off work is planned around your trading hours where possible, and the switchboard schedule is updated when we finish.
- You end up with
- Tested circuits with an updated switchboard schedule, plus a CCEW
Bigger Projects We Have Wired
Two builds that show how we plan and run a job from first drawings to handover.
What Our Clients Say About End Point Electrical
5.0 from 14 Google reviews- Rated 5 out of 5
“I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”
Graham Lewis
- Rated 5 out of 5
“Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”
Melanie Bloom
- Rated 5 out of 5
“Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”
Reece Tailby
- Rated 5 out of 5
“Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”
Tristan Black
- Rated 5 out of 5
“Excellent communication and quality of work. Very professional, would highly recommend.”
Dexywilson
- Rated 5 out of 5
“I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”
Benjamin Williams
- Rated 5 out of 5
“Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”
Ryan Hutton
- Rated 5 out of 5
“Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”
Ben Rasmussen
- Rated 5 out of 5
“Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”
Mat Chakley BRACE
- Rated 5 out of 5
“Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”
Nathanael Merchant
- Rated 5 out of 5
“We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”
Andy Crow
- Rated 5 out of 5
“I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”
Harald Svensen
- Rated 5 out of 5
“Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”
Naomi Cohen
- Rated 5 out of 5
“Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”
Adam Farrow-Palmer
Cremorne Electrician FAQs
Can my older Cremorne unit run an induction cooktop?
Sometimes, but check first. Induction cooktops can draw a lot of current, and older units often have a light sub-main from the meter panel. We look at the cable size and the board and work out what the supply can carry. If it falls short, a heavier sub-main or a cooktop with a power limit setting are the usual options.
Who approves a new sub-main to my Cremorne unit?
The owners corporation, through your strata manager. The new cable usually runs through common property from the meter panel to your unit, so the committee needs to agree to the route and the work. We can give them a short description of what is involved and how long the power to your unit would be off.
Do you do fit-outs for shops on Military Road in Cremorne?
Yes. A new tenant usually needs lighting and power moved to suit the layout, along with a check of the switchboard, and sometimes extra circuits for equipment. Emergency and exit lighting must work and be tested. We arrange access with the landlord or building manager and finish with a compliance certificate for the installation.

Book an Electrician in Cremorne
Call 0478 045 154, or send through the job and your address in Cremorne and we will come back to you with a quote.


