Electrician in Mosman
Rewiring and lighting control for Mosman renovations, planned with your builder or architect.
Your Mosman Electrician
End Point Electrical takes on renovation wiring in Mosman, working from our base in Terrey Hills. Federation and interwar houses here typically need a rewire once the walls open up, and many owners use the chance to add C-Bus or KNX lighting control. Talk to us early, while the plans can still change. Call 0478 045 154. NSW contractor licence 397311C.
Nearby suburbs we cover
- Cremorne
- Neutral Bay
- Seaforth
- Based in
- Terrey Hills NSW 2084
- Hours
- Mon to Fri 7am to 5pm, Sat 7am to 12pm
- NSW licence
- 397311C
- Phone
- 0478 045 154
Mosman 2088
Mosman: heritage houses and high-spec renovations
Mosman has a large stock of Federation and interwar houses, many inside heritage conservation areas, alongside harbourside homes and older apartment blocks. Renovation drives most of the electrical work. Original houses can still carry early wiring in the roof space, and the meter box often sits on the front verandah, where any change to the facade needs care under heritage controls.
Many Mosman renovations go well beyond a rewire. Owners often ask for lighting control on C-Bus or KNX, with Basalte or Ivory Egg keypads replacing banks of switches. Whole-home audio from Sonance or Sonos is another common request. All of it is far easier to cable while the ceilings are open, so we like to see the plans early and work through them with your builder or architect.
Typical jobs
Typical Jobs in Mosman
What the work usually involves, how long it takes and what you are left with when we pack up.
Build or renovation wiring
Heritage-sensitive Mosman renovations, rewired while the ceilings and floors are open.
We start from your plans and draw the lighting and power layout room by room. Cable goes in at rough-in while the frame is open, with each run photographed, and fit-off happens once the surfaces are finished. We work to the builder’s program and size the switchboard for what you plan to add later, so a late change rarely means opening walls.
- You end up with
- Every circuit and safety switch tested, with a CCEW at handover
Home automation
C-Bus or KNX lighting control with Basalte or Ivory Egg keypads, planned at the design stage.
Most automation work centres on lighting control: scenes and timers you run from an app or a wall keypad. Larger homes usually go with a wired system such as Clipsal C-Bus or KNX, while Clipsal Wiser suits a smaller retrofit. Climate and blinds can be added later. Cabling is far easier during a build or renovation, so we plan it with you and your builder early.
- You end up with
- A programmed system with a run-through of the controls, plus a CCEW for the electrical work
TV and audio install
In-ceiling Sonance or Sonos audio through living areas and out onto the terrace.
Most AV jobs are a TV on the wall with the cables hidden, often with a soundbar or in-ceiling speakers alongside. For whole-home audio we install Sonos or Sonance speakers room by room. Power and data go in behind the screen so nothing hangs down the wall. Before we leave, we tune the antenna or speaker settings and show you the controls.
- You end up with
- A mounted, working setup with no loose cables on show
Bigger Projects We Have Wired
Two builds that show how we plan and run a job from first drawings to handover.
What Our Clients Say About End Point Electrical
5.0 from 14 Google reviews- Rated 5 out of 5
“Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”
Tristan Black
- Rated 5 out of 5
“I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”
Benjamin Williams
- Rated 5 out of 5
“I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”
Harald Svensen
- Rated 5 out of 5
“Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”
Naomi Cohen
- Rated 5 out of 5
“Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”
Melanie Bloom
- Rated 5 out of 5
“Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”
Reece Tailby
- Rated 5 out of 5
“Excellent communication and quality of work. Very professional, would highly recommend.”
Dexywilson
- Rated 5 out of 5
“Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”
Ryan Hutton
- Rated 5 out of 5
“Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”
Ben Rasmussen
- Rated 5 out of 5
“Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”
Mat Chakley BRACE
- Rated 5 out of 5
“Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”
Nathanael Merchant
- Rated 5 out of 5
“We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”
Andy Crow
- Rated 5 out of 5
“I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”
Graham Lewis
- Rated 5 out of 5
“Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”
Adam Farrow-Palmer
Mosman Electrician FAQs
Can you rewire a heritage house in Mosman?
Yes. Most of the work happens inside the walls and roof space. Where the meter box or outdoor lights sit on a heritage facade, we keep changes small and match the existing look, and we check with you or your architect about any council conditions first. Rewiring goes fastest when floors or ceilings are already open.
Which home automation systems do you install in Mosman homes?
We install Clipsal C-Bus and KNX for whole-house lighting control, and Clipsal Wiser where a lighter wireless setup suits better. Keypads from Basalte and Ivory Egg give a cleaner wall than rows of switches. Choosing the system before rough-in saves cable runs later, so we talk it through with you at plan stage.
Do you work with architects and builders on Mosman renovations?
Yes, often. We can work from the architect's lighting plan or draw one from the drawings, then fit our rough-in and fit-off around the builder's program. On bigger renovations we also size the switchboard for loads such as underfloor heating or ducted air conditioning, so nothing has to be squeezed in later.
Book an Electrician in Mosman
Call 0478 045 154, or send through the job and your address in Mosman and we will come back to you with a quote.