Electrician in West Pymble

Lighting and renovation wiring for West Pymble's post-war homes on sloping blocks beside the bush.

Your West Pymble Electrician

West Pymble is full of post-war homes on sloping blocks, and End Point Electrical comes from Terrey Hills to rework their wiring. Exposed timber ceilings leave no cavity for new cable, so lighting there takes careful planning. Owners also convert the space under the house into rooms that need power and lights, and older boards get replaced along the way. Call 0478 045 154. NSW licence 397311C.

Nearby suburbs we cover

  • Pymble
  • Turramurra
  • Gordon
  • Killara
The End Point Electrical team standing together outdoors
Based in
Terrey Hills NSW 2084
Hours
Mon to Fri 7am to 5pm, Sat 7am to 12pm
NSW licence
397311C

West Pymble 2073

West Pymble: mid-century homes on the slopes

West Pymble was mostly developed after the war, and many of its homes are architect-designed houses from the 1950s to the 1970s. Raked or flat timber ceilings with exposed beams are common, and they leave little or no cavity for running cable. New lighting in these rooms often means track lighting or fittings fed from the walls, chosen to suit the look of the house.

The streets fall away towards bushland, so plenty of homes sit on sloping blocks with a garage or storage area underneath. Owners often turn that lower level into a rumpus room or a home office, which needs its own power and lighting and sometimes a new circuit from the board. Many original boards in these houses are due for replacement by the time the renovation starts.

Typical jobs

Typical Jobs in West Pymble

What the work usually involves, how long it takes and what you are left with when we pack up.

  • Lighting upgrade

    Lighting under exposed-beam ceilings in West Pymble homes, using track lighting or fittings fed from the walls.

    Plenty of lighting jobs start with old halogen downlights coming out in favour of LED. Others add lights to a renovated room or light a path and garden for the evenings. We agree the layout and the switching with you first, so the lights land where you need them. Then we fit them and set up dimmers in the rooms where you want softer light.

    Usual time on site
    1 to 3 hours
    You end up with
    Working lights on the switching you asked for, with a CCEW for the installation work
    More on lighting upgrade
  • Build or renovation wiring

    Power and lights for under-house conversions in West Pymble, from rough-in through to fit-off.

    We start from your plans and draw the lighting and power layout room by room. Cable goes in at rough-in while the frame is open, with each run photographed, and fit-off happens once the surfaces are finished. We work to the builder’s program and size the switchboard for what you plan to add later, so a late change rarely means opening walls.

    You end up with
    Every circuit and safety switch tested, with a CCEW at handover
    More on build or renovation wiring
  • Switchboard upgrade

    Original boards in West Pymble mid-century homes, replaced before a renovation adds new circuits.

    The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.

    Usual time on site
    4 to 6 hours
    You end up with
    A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
    More on switchboard upgrade

Bigger Projects We Have Wired

Two builds that show how we plan and run a job from first drawings to handover.

What Our Clients Say About End Point Electrical

5.0 from 14 Google reviews
  • Rated 5 out of 5

    “Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”

    Reece Tailby

    Google review

  • Rated 5 out of 5

    “Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”

    Naomi Cohen

    Google review

  • Rated 5 out of 5

    “Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”

    Tristan Black

    Google review

  • Rated 5 out of 5

    “I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”

    Benjamin Williams

    Google review

  • Rated 5 out of 5

    “I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”

    Harald Svensen

    Google review

  • Rated 5 out of 5

    “Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”

    Melanie Bloom

    Google review

  • Rated 5 out of 5

    “Excellent communication and quality of work. Very professional, would highly recommend.”

    Dexywilson

    Google review

  • Rated 5 out of 5

    “Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”

    Ryan Hutton

    Google review

  • Rated 5 out of 5

    “Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”

    Ben Rasmussen

    Google review

  • Rated 5 out of 5

    “Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”

    Mat Chakley BRACE

    Google review

  • Rated 5 out of 5

    “Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”

    Nathanael Merchant

    Google review

  • Rated 5 out of 5

    “We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”

    Andy Crow

    Google review

  • Rated 5 out of 5

    “I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”

    Graham Lewis

    Google review

  • Rated 5 out of 5

    “Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”

    Adam Farrow-Palmer

    Google review

West Pymble Electrician FAQs

How do you add lights to an exposed-beam ceiling in my West Pymble home?

With no cavity above, cable has to come from somewhere else. Track lighting fed from one point works well, as do wall lights wired through the stud walls. Slim surface conduit painted to match the timber is another option. We look at the beams and the roof structure first, then suggest an approach that keeps the ceiling looking the way it was designed.

We are turning the area under our West Pymble house into a room. What electrical work does it need?

Usually new power points and lighting, plus interconnected smoke alarms and data if it will be an office. Depending on the load, it may need a new circuit or two from the board. We like to see the plans before the walls are lined so the cable can go in at rough-in. Talk to your builder about when we should be on site.

Is the original wiring in my 1960s West Pymble house safe?

Cable from that era is often still in reasonable condition, but the board usually lacks full RCD protection and the circuits may have been altered over the years. We test the circuits and inspect the board, then tell you what can stay and what should be replaced. Most homes of that age benefit from a new board with safety switches on every circuit.

Book an Electrician in West Pymble

Call 0478 045 154, or send through the job and your address in West Pymble and we will come back to you with a quote.