Electrician in Beacon Hill

Switchboard upgrades and cooling circuits for the post-war houses along the Beacon Hill ridge.

Your Beacon Hill Electrician

On the Beacon Hill ridge, most homes are post-war brick or fibro houses, and End Point Electrical comes over from Terrey Hills to work on them. The original switchboard is a typical replacement. Rooms facing west take the afternoon sun, so a circuit for a split system is the other common call, and LED lighting usually follows a refresh. Phone 0478 045 154. NSW licence 397311C.

Nearby suburbs we cover

  • Narraweena
  • Allambie Heights
  • Brookvale
  • Frenchs Forest
The End Point Electrical team standing together outdoors
Based in
Terrey Hills NSW 2084
Hours
Mon to Fri 7am to 5pm, Sat 7am to 12pm
NSW licence
397311C

Beacon Hill 2100

Beacon Hill: post-war homes along the ridge

Beacon Hill sits on one of the higher ridges behind Dee Why and Brookvale, and its streets are lined with modest post-war homes, a good number of them brick or fibro on decent blocks. Many have been updated room by room over the decades without the switchboard ever changing. We often find rewireable fuses on a crowded board, with no safety switch on the lighting circuits.

The ridge gives many houses long views, and the rooms that face them often face west as well. Afternoon sun makes those rooms hot in summer, and a split system is the usual fix. Each one needs its own circuit, which an older board may have no space for. A board upgrade first leaves room for cooling and for whatever comes after it, and new LED fittings often go in during the same refresh.

Typical jobs

Typical Jobs in Beacon Hill

What the work usually involves, how long it takes and what you are left with when we pack up.

  • Switchboard upgrade

    Rewireable fuse boards in post-war Beacon Hill homes, replaced with breakers and RCDs on every circuit.

    The board we usually replace is an older one with ceramic fuses, or with only one or two safety switches (RCDs). It comes out and a new board goes in with circuit breakers and RCD protection on the circuits. We size it with spare room for later additions like air conditioning or an EV charger. Expect the power to be off for most of the job.

    Usual time on site
    4 to 6 hours
    You end up with
    A labelled switchboard with tested RCD protection and a Certificate of Compliance for Electrical Work (CCEW)
    More on switchboard upgrade
  • Air conditioning circuit

    Split system circuits for west-facing Beacon Hill living rooms and bedrooms that heat up in the afternoon.

    Most heating and cooling work starts at the switchboard. A split system or ducted unit needs its own circuit and an isolator at the outdoor unit, sized for what the system draws, and older boards often need upgrading first. We wire for brands such as Daikin and Mitsubishi Electric. Electric underfloor heating in bathrooms is another regular job.

    You end up with
    A dedicated, tested circuit for the system and a CCEW
    More on air conditioning circuit
  • Lighting upgrade

    Old fluorescent battens and halogen downlights in Beacon Hill homes swapped for LED during a refresh.

    Plenty of lighting jobs start with old halogen downlights coming out in favour of LED. Others add lights to a renovated room or light a path and garden for the evenings. We agree the layout and the switching with you first, so the lights land where you need them. Then we fit them and set up dimmers in the rooms where you want softer light.

    Usual time on site
    1 to 3 hours
    You end up with
    Working lights on the switching you asked for, with a CCEW for the installation work
    More on lighting upgrade

Bigger Projects We Have Wired

Two builds that show how we plan and run a job from first drawings to handover.

What Our Clients Say About End Point Electrical

5.0 from 14 Google reviews
  • Rated 5 out of 5

    “Andrew and Jake have been amazing and professional to work with. They've fixed power points and replaced light fittings at my place. I've since recommended them to both my parents and grandparents where a fuse box upgrade has been completed for my fathers place and an oven install along with lighting and ceiling fans for my grandmother. Both have had nothing but positive things to say. Would highly recommend!”

    Reece Tailby

    Google review

  • Rated 5 out of 5

    “I recently completed a major renovation on my home where we essentially rebuilt it stage by stage, eventually tripling the size of the house. Endpoint Electrical wired the entire project and were fantastic to work with from start to finish. Our build was a little unconventional compared to a standard new build, as we were living in the house the whole time. This meant the electrical work had to constantly adapt — thinking about both the present and the future, with some areas not even built yet while others were scheduled to be removed later on. Despite the challenges, the team handled everything professionally and thoughtfully. They are exceptional at what they do, very easy to communicate with, can think out of the box and all round a top blokes. I use them when ever I can and recommend to all.”

    Benjamin Williams

    Google review

  • Rated 5 out of 5

    “Had fans, power points and tv speakers installed. Guys did an amazing job, quick, clean and very polite. Highly recommended”

    Nathanael Merchant

    Google review

  • Rated 5 out of 5

    “Andy and his team of electricians are true professionals. All electrical jobs are well considered and undertaken with care to provide the best possible outcome. Whether the job is large or small, Andy will continue to investigate the issue to achieve the desired result and he provides exceptional service which is rare to find these days. I have no hesitation in recommending End Point Electrical for all your electrical needs.”

    Melanie Bloom

    Google review

  • Rated 5 out of 5

    “Couldn’t recommend them higher! I was doing renovations on my house and I got the boys from end point electrical to come in. From the get go it was so easy they looked at my property gave me a quote and the price was very reasonable. They got it done with no issues and their customer service was amazing! They updated me when I needed to be. The quality of the work was amazing! They were great blokes to deal with. If you’re looking for the best couldn’t recommend them any higher! Would also have a beer with them!”

    Tristan Black

    Google review

  • Rated 5 out of 5

    “Excellent communication and quality of work. Very professional, would highly recommend.”

    Dexywilson

    Google review

  • Rated 5 out of 5

    “Did an amazing job and cleaned up after they finished. Pricing was great, and will definitely use them again.”

    Ryan Hutton

    Google review

  • Rated 5 out of 5

    “Andrew & Jake were exceptional when it came to the electrical package for my project! There assistance within pre construction and helping achieve the electrical budget was outstanding, and there recommendations for light fittings and value management options is what made the build come to life for me and my family! Very glad my builder recommended/uses them - and I strongly suggest you give these fella a call!”

    Ben Rasmussen

    Google review

  • Rated 5 out of 5

    “Andrew and Jake and all the boys are always super helpful clean up after themselves Respectful to clients turn up when they say they will. You will have a great result at a fair price”

    Mat Chakley BRACE

    Google review

  • Rated 5 out of 5

    “We have used Andy and Jake from End Point Electrical for many years for electrical works at our house and always found them fantastic. Would highly recommend them!”

    Andy Crow

    Google review

  • Rated 5 out of 5

    “I can highly recommend End Point Electrical. They have provided exemplary service to me, undertaking electrical and network wiring work at both my previous townhouse and my current apartment. They are so good that I have signed them up as the preferred supplier to our building, of which I am the strata committee chair.”

    Graham Lewis

    Google review

  • Rated 5 out of 5

    “I recently used End Point Electrical for a renovation. Their team was terrific. Professional, on time on budget, and solution orientated. Highly recommend them.”

    Harald Svensen

    Google review

  • Rated 5 out of 5

    “Highly recommend End Point Electrical - Jake, Andrew and the staff are all fantastic to work with and do a great job. We have had the team install a new electrical box, kitchen renovations, ceiling fans and much more. Each job has been done professionally and seamlessly. Thanks!!”

    Naomi Cohen

    Google review

  • Rated 5 out of 5

    “Andy, Jake and their team were fantastic. Great communication, showed up when they said they would and with all materials there. They adapted smoothly to my atypical problems and their attention to detail was outstanding. Their work is so neat and tidy I asked them to back to tidy up a previous electrician's messy cabling. I've recommended End Point to multiple friends already and will keep coming back.”

    Adam Farrow-Palmer

    Google review

Beacon Hill Electrician FAQs

How do I know if my Beacon Hill switchboard is due for replacement?

Rewireable fuses are the clearest sign, along with a board that has no spare space. Safety switches covering only some circuits, or none, are another. Scorch marks or a board that feels warm are reasons to call without waiting. We test the board and the circuits it feeds, then tell you whether it can stay. A replacement takes 4 to 6 hours.

Where should the split system outdoor unit go on my Beacon Hill house?

Ideally close to the indoor unit, on a wall or slab with airflow around it and away from bedroom windows, since the unit hums when running. The electrical side is a dedicated circuit from the board and an isolator beside the outdoor unit. We work with your air conditioning installer so the circuit is ready when the unit goes in.

Is it worth replacing the old fluorescent lights in my Beacon Hill home with LED?

In most cases, yes. LED fittings use less power and start instantly, without the flicker of an ageing fluorescent tube. Old fittings can also hide brittle wiring, which we check when they come down. We match new fittings to the room and can add dimmers where they suit. Most lighting jobs take 1 to 3 hours.

Book an Electrician in Beacon Hill

Call 0478 045 154, or send through the job and your address in Beacon Hill and we will come back to you with a quote.